unbrick meizu m3 note by sp flash tool working Edited by shahid19950311 at 2017-09-03 21:32
scatter file for meizu m3 note http://kaitect.com/1ngS i am not saying this will also work with you but work with mine you can try i hope this will work nothing is better than something watch this video on youtube http://kaitect.com/1QpV | |
|
|
|
|
This process won't work for most of the users because the flash tool can't detect their device properly. It shows that the device is connecting and disconnecting continuously while it is plugged in.
| |
RateExperience 0Prestige 0Gold +5 |
|
rudra964 replied at 2017-09-05 18:03 I will post new video for those Whom device doesn't detected by sp flash tool By dissembling usb cable | |
|
|
|
shahid19950311 replied at 2017-09-05 18:35 Not sure if the average user will be able to follow you. It's better to just get the phone reflashed from a service centre. | |
|
|
|
rudra964 replied at 2017-09-05 19:35 Yes i am with you But what for those users doesn't have bill or they can't manage to go to service centre I have file for meizu M3 Note extract by mrt dongle | |
|
|
|
shahid19950311 replied at 2017-09-05 21:14 i have it too, and i had a hard bricked device too which died while updating to Nougat, after talking with many users i came to know that all of them had the same issue, SP Flash tool reccognised their devices as VCOM which kept connecting and disconnecting every few seconds. As a result, it is impossible to flash anything on the phone without an mrt dongle. | |
|
|
|
rudra964 replied at 2017-09-06 16:07 http://adf.ly/1o5bzA You watch this i fixed the problem Now sp flash tool Working In meizu M3 Note while flashing I flashed my phone too by this process and showed you in this video Just watch Try and then Believe | |
|
|
|
shahid19950311 replied at 2017-09-06 18:04 | |
|
|
|
|
Edited by shahid19950311 at 2017-09-06 20:54
rudra964 replied at 2017-09-06 18:50 Here is your link Ok i am removing But download all file from mine link Because it is recommended | |
|
|
|
|
The fix is for M681H,not L681H ,don`t waste your time,im looking for solution for this problem with connecting and siconnecting,because i have L681H backup,But this error START_CMD_FAIL is pissing me out! Right out of my a** Cannot go to service center,because they have MRT dongle only in Sofia (400KM) so with the money for going to Sofia and the bill for the repair it will cost me at leas 70 euro,that is alot for our standart of living in Bulgaria,so im looking for solution of this stupid error,if the phone connects just once,i think it will be unbricked,i`ve heard that there is some way with soldering a wire on the motherboard,but i don`t have a clue where do i have to solder it (no schematics of the motherboard,no + - on the board.i am so confused,i am repairing iphones and all kind of android phones,even with locked bootloaders without going to a service,but this phone just beat the cr*p out of me,there has to be a way...There is always a way
| |
|
|
|
15