all firmware are too old pro 7 plusIn an attempt of updating my Meizu Pro 7 Plus, all firmwares, when flashing the ROM, reports the message of "Firmware too old", or "Firmware is corrupted".
Now my Meizu Pro 7 Plus is on the Flyme loading screen forever. Please send help or instructions as to how to download Firmware that is not "too old" or "corrupted" | |
|
|
What Firmware are you using before the bootloop occurs. Try to flash the same firmware again. Just download it on PC. Connect your phone in recovery mode to pc. A recovery drive will appear, just copy and paste the downloaded firmware in the drive. Now checked the option Clear Data and now tap on Update Firmware. It will solve your problem. Don't try to flash the different region firmware on your phone. If your phone comes with A version, then install A version only. If it comes with G version, then install G version only. Hope this will solve your problem.
| |
|
|
What if the phone is Q version, but aliexpress seller has installed the Global version?
| |
I can fix all Meizu dead, bootloop, any software problem.
Я могу исправить все мертвые Мэйзу, bootloop, любую проблему с программным обеспечением. 我可以修复所有魅族死机,bootloop,任何软件问题。 Contact: - Facebook: https://www.facebook.com/nguyenle.huu.5 - VK: https://vk.com/id501885146 - Wechat: mezuddtm_huunguyen | |
|
|
User571470120 replied at 2018-08-23 13:05 no answers !! | |
|
|
4