PRO 7 and PRO 7 PLUS GLOBAL ROOT GUIDE (FULL ROOT AUTHORITY SOLUTION SuperSU)

3831

6

2018-02-03 02:23

Show all posts
Edited by DRTOLGA at 2018-03-22 16:28

1. Log in to Meizu Account.

2. Make the language simplified chinese.

3. Restart the fingerprint section if the root menu does not come. Give root privileges. I remember we were clicking on the right side.

4. Select the language you want again.


Try the QuickShortmaker method on non-devices.

http://forum.flymeos.com/thread-38377-1-1.html

https://youtu.be/Bh6_KxQZx9Q


And my article M6NOTE


1. Go to the Play Market

2. In the search, QuickShortcut

3. Install this application

4. We enter in the search for this application the Flyme account

5. We are looking for a line in which will be written com.meizu.root.OpenSystem

6. Make a shortcut

7. Go Settings / fingerprints and security / application protection - in the top check box on against application protection.
We move the Flyme Account application to the checkbox.

8. Launch the Flyme Account and run it
If the shortcut does not start to lock the phone, and unlock again, launch the shortcut that created the root.

6.1.2.3G AND ALL ROM SUCCESS!!!!!

Extra For 4pda(What I'm telling you is for those who do not understand.)
1. Go to Play Market
2. In the search enter QuickShortcut
3. Install this application
4. We enter the Flyme account in the search for this application
5. We are looking for a line in which written com.meizu.root.OpenSystem
6. Make a shortcut
7. Go Settings / prints and security / application protection - in the very top put a check mark against the protection of applications.
We move the Flyme Account application to the checkbox.
8. Launch the label Flyme account and rutile
If the shortcut does not start to lock the phone, and again unlock, run the shortcut that created the rute.

----------------------------------------------------------------------------------------------------------------------



DRTOLGA FULL ROOT AUTHORITY SOLUTION

FRIENDS SOLUTION FINDING.

1. Flyme You will open Root for the first time. Because once you grant authority to the program, you can not grant authority again if your root is deleted. So every time you delete the root you have to load the ROM from scratch again.

2. Then you install KingoRoot (PC).
3. You also connect your device in Debug Mode.
4. You are running the program.
5. The program will grant Root authority.
6. You select "Allow" for the incoming options.
7. OK "Root" is working.