I hope you understand what i write, because i don't have good english anyway.
I write some known problem that may happen when booting M2N. This is just based some other people post in Indonesia M2N forum. Please CMIIW.


1. Stuck in MEIZU Logo, No Flyme Logo, No Recovery, & The Phone Keep Restarting
Descr iption : After charging the phone with the phone condition turned off then you turn on the phone, sometimes the phone just like the title above.
Solution : Just let it keep restarting for several times and it will recover itself. If not recovered i don't know.

2. Stuck in Flyme Logo but can Enter Recovery
Descr iption : Your phone is Bootloop. This happening after rooting the phone and install some application that requires root permission then you modifiy your phone (modding).
Solution : After 1 hour waiting but still stuck in the flyme logo, try to turn off your phone (press power button till the phone turn off) & turn on again. If still stuck try restarting again. If still stuck after several times restarting, try to wipe data & reinstall the FlymeOS with Recovery (Press Vol Up + Power button when the phone turned off).

3. Stuck in Flyme Logo & No Recovery
Descr iption : After modding your phone and reinstall the FlymeOS but you are not wipe the data, sometimes if you are unlucky you will get like the title above.
Solution : Replace the main board.

4. Black Screen, No MEIZU Logo, No Flyme Logo, No Recovery, & The Phone Keep Restarting
Descr iption : Your phone is Bricked. This is happening when you install wrong firmware, or maybe turn off the phone while installing the firmware, try to unlock the bootloader, or installing firmware from the other than recovery.
Solution : Replace the main board.

Until now i still don't know how to repair bricked meizu phone using windows software. Some people in the forum says it can but not explaining how.