Meizu m3 note Hard Brick Fix Tutorial Edited by rudra964 at 2017-11-10 22:28
https://forum.xda-developers.com/android/development/developer-verified-meizu-m3-note-hard-t3682743/post74012914#post74012914 Enjoy! | |
SignatureThis is not a signature. I am too lazy to steal one, perhaps you could loan me yours? |
|
Edited by User5200283480 at 2017-11-18 23:47
i have L681. i had it when it was launched. that time there was no warming on the forums that this model m3 note has two type of main board. first one is M model. that is why i made a mistake. i flashed the wrong M firmware. after than my L681 hard bricked. tried many things. got worse and worse finally it stacked in boot loop and black screen. nothing changed sofar . Thank you very much. this is the second day off my phone that i use for more than one year. Thank you thank you thank you. and thank you. Who has hard bricked. here is my guide. My Phone is L681. + first of all before you start these drivers must be installed correctly: MediaTek USB Port MediaTek Preloader USB VCOM (Android) MediaTek DA USB VCOM (Android) + than try the all steps again and again. if it doesnt flash keep pressing three side buttons at the same time and hold it untill it restarts (usb cable was pluged.). it flashed. than i succeed. than i used Kirpitch.M3Note https://drive.google.com/drive/folders/0B-ShPFGEwXcoUDQ1N1BaWERYY0U modifed sp flash tool to flash my firmware. i has both for m and l models flyme 6 support. thank you very much RADev Team | |
Comment
User539403 ...: but when i flashing it to myL681H,itwill appears this errors:ERROR:STATUS_EXT_RAM_EXCEPTION (0xC0050005),and when i try again and again ,the software may not responding.....
2017-12-13 23:29
|
|
Пожалуйста дайте нормальный перевод. Как из кирпича сделать кирпич!
| |
but when i flashing it to myL681H,itwill appears this errors:ERROR:STATUS_EXT_RAM_EXCEPTION (0xC0050005),and when i try again and again ,the software may not responding.....
| |
|
|
User5200283480 replied at 2017-11-18 19:13 but when i flashing it to myL681H,itwill appears this errors:ERROR:STATUS_EXT_RAM_EXCEPTION (0xC0050005),and when i try again and again ,the software may not responding..... | |
User539403220 replied at 2017-12-13 23:29 if it doesnt flash keep pressing three side buttons at the same time and hold it untill it restarts (usb cable was pluged.). it flashed. than i succeed. | |
|
|
MUST DO
+ first of all before you start these drivers must be installed correctly: MediaTek USB Port MediaTek Preloader USB VCOM (Android) MediaTek DA USB VCOM (Android) Use USBDeview or USBreview app to see and uninstall the drivers. | |
|
|
Thanks for sharing
| |
|
|
thank you
| |
From Forum App |
|
thx good topic
| |
From Forum App |
|
12