Change the region to flash A or G firmware

10815

17

2017-07-02 02:55

Edited by User92078052 at 2017-08-11 17:23

My M5 note was using the G firmware and i want to flash to Flyme 6 betawhen i flash the A firmware, my phone said the firmware corrupted
I can't root my phone to use Supersu and flashfire to flash A firmware

After searching on the internet, I found the way from chinese forum to make my M5 note change the region, so I can use the official recovery to flash A firmware
I copy the solution from the chinese forum so you should know THERE MAY HAVE SOME PROBLEM WHEN YOU FLASH YOUR PHONE

I downloaded this tool pack at baidu pan Tool pack (1dE2TZf7 Password: ri5e)
China region img (1kVzAmyz Password: 08vx)

1.Install the drivers
2.Open the flashtool
3.Follow the picture to set up
4.Press Ctrl+Alt+V and you can see the flashtool go into Advanced mode

5.Choose Window and click Write Memory
6.If you want to change the region to China, You should choose the devinfo_china.img at File Path
   Choose devinfo.img at File Path if you want to go back and flash G firmware
7.HEX in Write Memory should change to 0x30800000
8.Click Write Memory first, then turn off the phone, Press Volume+ and connect the computer

It should have a message pop out when it done and success

Hope this can help if you have the same problem as me, because I tried a lot of way to flash my phone to A firmware
Somebody said there has a signal problem after flash the A firmware, but my phone doesn't have the signal problem
I don't know will this solution make your phone having signal problem

Source: http://bbs.flyme.cn/thread-1709923-1-1.html