---

You need to flash 5.1.11.0G to your chinese Meizu M3 Note (M681Q) phone, front camera works

Guys, I rooted my m3 note M681Q, then changed the phone id to global, then flashed 5.1.3.3G and I lost the front camera. I gave up on the global rom and flashed 5.1.6.0A, rooted again and removed chinese bloat with titanium backup and finally I found out how to extract multilanguage package from the global rom 5.1.3.4G and installed it on the chinese and VOILAA I sort of have my own special "5.1.6.0G". To sum it up I debloated and added multilanguage support to the chinese version.

You will avoid many headaches if you do like I did instead of waiting for false hopes for a G ROM. remember that there are 3 kinds of m3 note - M681H/L681H(International) and M681Q(Chinese) - so if you have the chinese m681q you can forget about the global rom because if it is planned by meizu or flyme it will only be available for the international versions.

I hope this clarifies this subject once and for all ;)

It's not hardware issue, that firmware is incompatible with M681Q version.

Then problem in camera .You need visit service center.

hello : If you have changed the id to convert mobile globally and then has Flashed the terminal FlashFire certainly has put the wrong firmware , there are 2 different models m3 note when firmwares are mixed often happens that, the mobile when a firmware is not his usually alert saying "corrupt firmware" , so not recommended for use FlashFire without knowing the exact model , identify what the real model you have before exacerbate the problem and set the correct firmware for your model , there are dozens of users affected in various forums with the same problem you have to force the firmware. if this is not the case should contact your dealer or technical service , it is my best advice .

spanish :

hola : si ha modificado el id para convertir el movil a global  y despues ha flaseado  el terminal  con flashfire seguramente le ha puesto el firmware incorrecto , hay 2 modelos diferentes de m3 note , cuando se mezclan los firmwares suele pasar eso , el movil cuando un firmware no es el suyo suele avisar diciendo  " firmware corrupto " , por eso NO ES RECOMENDABLE  usar flashfire sin saber el modelo exacto , identifique cual es el modelo real que tiene antes de agravar el problema y ponga el firmware correcto a su modelo , hay decenas de usuarios afectados en diversos foros con el mismo problema que tiene usted por forzar el firmware . si este no es su caso deberia contactar con su vendedor o servicio tecnico , es mi mejor consejo .

I tried factory reset . the problem still continues.

I tried factory reset . the problem still continues.

try factory reset

Please try a clean data reset.If still not solve then visit nearest service center.