Not Working Front Camera Help MeI have MEIZU M3 NOTE 681Q phone. I set up my phone 5.1.3.1G version. But my front camera is not working.
 How can I solve this? You help me please. Thank you. | |
|
|
|
|
If possible provide a ss of camera error.I think you need contact with service center.
 | |
|
|
|
arka1004 replied at 2016-09-16 10:51 When you switch between front and back cameras in the camera program(retrica,b12, orginal program..), opening rear camera steady. The driver of the front camera can be installed. I think.But I could not find it. | |
|
|
|
User511560432 replied at 2016-09-16 12:59 Please try a clean data reset.If still not solve then visit nearest service center. | |
|
|
|
|
try factory reset
| |
|
|
|
|
I tried factory reset . the problem still continues.
| |
|
|
|
|
I tried factory reset . the problem still continues.
| |
|
|
|
|
hello : If you have changed the id to convert mobile globally and then has Flashed the terminal FlashFire certainly has put the wrong firmware , there are 2 different models m3 note when firmwares are mixed often happens that, the mobile when a firmware is not his usually alert saying "corrupt firmware" , so not recommended for use FlashFire without knowing the exact model , identify what the real model you have before exacerbate the problem and set the correct firmware for your model , there are dozens of users affected in various forums with the same problem you have to force the firmware. if this is not the case should contact your dealer or technical service , it is my best advice . spanish : hola : si ha modificado el id para convertir el movil a global y despues ha flaseado el terminal con flashfire seguramente le ha puesto el firmware incorrecto , hay 2 modelos diferentes de m3 note , cuando se mezclan los firmwares suele pasar eso , el movil cuando un firmware no es el suyo suele avisar diciendo " firmware corrupto " , por eso NO ES RECOMENDABLE usar flashfire sin saber el modelo exacto , identifique cual es el modelo real que tiene antes de agravar el problema y ponga el firmware correcto a su modelo , hay decenas de usuarios afectados en diversos foros con el mismo problema que tiene usted por forzar el firmware . si este no es su caso deberia contactar con su vendedor o servicio tecnico , es mi mejor consejo . | |
|
|
|
User511560432 replied at 2016-09-17 20:22 Then problem in camera .You need visit service center.  | |
|
|
|
|
It's not hardware issue, that firmware is incompatible with M681Q version.
| |
|
|
|
12