CHECK OUT THE FIRST MEIZU PRO6 TEARDOWN
Meizu might not be China’s largest smartphone manufacturer, but it sure is one of the most interesting ones. The company has introduced three devices this month, and one of those handsets is their new flagship smartphone, the Meizu PRO 6. Unlike its predecessor, the PRO 6 sports a 5.2-inch, and not the 5.7-inch panel, which makes this a rather compact smartphone, rather than a rather large phablet offering. The first Meizu PRO 6 teardown has surfaced online, courtesy of IT168, a China-based site which frequently disassembles newly released Chinese products. Anyhow, if you take a look at the gallery down below, you’ll get to see quite a few Meizu PRO 6 teardown images. Now, one thing IT168 noticed during this teardown, is the fact that Meizu used quite a bit of graphite thermal film and copper foil in order to enhance Meizu PRO 6’s cooling capabilities. As some of you might know, the Meizu PRO 6 also offers a rather interesting antenna design, all its antenna lines are placed in the lower portion of the device, which doesn’t exactly reflect all that much on the interior of the device, but it is definitely worth mentioning. The Meizu PRO 6 seems to be built well on both sides, once IT168 disassembled the device, they’ve noticed that Meizu actually utilizes an interesting charging circuit design which enhances the charging speed of Meizu PRO 6’s battery. The Meizu PRO 6 sports a 5.2-inch fullHD (1920 x 1080) display, 4GB of RAM and 32GB / 64GB of non-expandable native storage. The device is fueled by MediaTek’s Helio X25 64-bit deca-core SoC, and a 2,560mAh battery is also a part of the package. The 21-megapixel snapper (PDAF, Laser Autofocus) is placed on the back of the PRO 6, and a 5-megapixel unit can be found up front. The Meizu PRO 6 offers fast charging, and it also sports a pressure sensitive display (3D Press). The Meizu PRO 6 measures 147.7 x 70.8 x 7.3mm, while it weighs 160 grams.
| |
Comment
pajji： So many pieces
2016-04-30 15:47
Related threads |
|
|
U would have given it to me
| |
|
|
|
brian_rodrigues replied at 2016-05-03 20:02 I will :) | |
|
|
|
Bhavis replied at 2016-05-03 15:22 haha... May be you can gift me the phone instead of tearing it into pieces...  | |
|
|
|
|
So cool...I wish some day I would be able to do this :)
| |
Comment
brian_rodr ...： haha... May be you can gift me the phone instead of tearing it into pieces...
2016-05-03 22:32
|
|
|
Instead of teardown Y not show assembling of such phones
 | |
|
|
|
|
So many pieces
| |
|
|
|
|
Tearing down a Pro 6. Such a waste! {:10_323:}
| |
|
|
|
|
I just read the first line:
.... "may not be the biggest but most interesting ... released 3 phones this month ... " The red marked part is bad! Please be aware of it. The more products a company releases, the more the quality of service suffers. Same said different: They throw cheap hardware at you but don't back it up with decent Software and cut on Support. This are the downsides of releasing too many devices in a short period of time. | |
|
|
|
anky17cool replied at 2016-04-26 15:45 Haha Yeah .. :p | |
|
|
|
|
Can't see a device into pieces :p..
| |
|
|
|
10