unbrick meizu m3 note by sp flash tool working Edited by shahid19950311 at 2017-09-03 21:32
scatter file for meizu m3 note http://kaitect.com/1ngS i am not saying this will also work with you but work with mine you can try i hope this will work nothing is better than something watch this video on youtube http://kaitect.com/1QpV | |
|
|
|
|
Note: The author has been banned or deleted.
| |
|
|
|
|
My meizu M3 note is rebooting again n again n again n again continuesly
After I downgrade And ADB says unknown partitioning during flash recovery or framework And sp flash tool says Brom error sand data fail What I can do to flash So please give me solution of that please How can I fix it | |
|
|
|
|
My meizu M3 note is rebooting again n again n again n again continuesly
After I downgrade And ADB says unknown partitioning during flash recovery or framework And so flash tool says Brom error sand data fail What I can do to flash So please give me solution of that please How can I fix it | |
|
|
|
|
Tried everything,even soldiering a micro usb cable , you have to go to a service center,there is nothing that you can do at home if you dont have MRT dongle.I am waiting to see if the service center will succeed,if not... i have to look for a different service center...
| |
|
|
|
|
my phone after a downgrade rom resets to a black screen with the meizu logo and do not get any command from the keys or connect to usb
please let me know what to do | |
|
|
|
|
after changingcinese rom my phone meizu m3 note, my phone reboots to a black screen with the meizu logo and you do not get a command from the keys or connect to usb from pc
please let me know what to do | |
|
|
|
|
The fix is for M681H,not L681H ,don`t waste your time,im looking for solution for this problem with connecting and siconnecting,because i have L681H backup,But this error START_CMD_FAIL is pissing me out! Right out of my a** Cannot go to service center,because they have MRT dongle only in Sofia (400KM) so with the money for going to Sofia and the bill for the repair it will cost me at leas 70 euro,that is alot for our standart of living in Bulgaria,so im looking for solution of this stupid error,if the phone connects just once,i think it will be unbricked,i`ve heard that there is some way with soldering a wire on the motherboard,but i don`t have a clue where do i have to solder it (no schematics of the motherboard,no + - on the board.i am so confused,i am repairing iphones and all kind of android phones,even with locked bootloaders without going to a service,but this phone just beat the cr*p out of me,there has to be a way...There is always a way
| |
|
|
|
|
Edited by shahid19950311 at 2017-09-06 20:54
rudra964 replied at 2017-09-06 18:50 Here is your link Ok i am removing But download all file from mine link Because it is recommended | |
|
|
|
shahid19950311 replied at 2017-09-06 18:04 | |
|
|
|
rudra964 replied at 2017-09-06 16:07 http://adf.ly/1o5bzA You watch this i fixed the problem Now sp flash tool Working In meizu M3 Note while flashing I flashed my phone too by this process and showed you in this video Just watch Try and then Believe | |
|
|
|
15