Luqas84th
Eclair

Gold:36

Sign In:0

2018-07-12 16:48

Show all posts
Edited by Luqas84th at 2018-07-12 17:28

It is possible to instal Flyme 7 G beta on Pro 6 Plus A (I`m on list)?
Reply Support () Report
User520361910 ...
Donut

  • 0

    Threads

  • 4

    Posts

  • 45

    Credits

Gold:5

Sign In:0

2018-07-12 16:52

Show all posts
Archaea69 replied at 2018-07-12 11:33
Did you used Flyme 6.3.0 before?

Anyway, i think you have to completely reinstall Flyme 7. Frankly  ...

Yes I did. On Flyme 6.3.0.0g I had problem to use Navitel - GPS API cannot see satellites after start and close the program and work normally only after restarting and just one time. On Flyme 7 I have no problem with the Navitel. I'm happy!
Reply Support () Report
giannaki500
Froyo

Gold:5221

Sign In:548

2018-07-12 20:25

Show all posts
i have problem cant update beta flyme 7
2018-07-12 14.47.58.jpg

Comment

Gui1ty: Is version of phone international? Did You try redownload ROM? When I installed beta, it requested check "clear data". Maybe You also need to check "clear data"? Dont forget backup Your data before clear. Clear data is necessaril
2018-07-12 22:02
4ndrey: у мен такая же проблема телефон про 6 плюс 6.3.0.0G что делать кто знает?? help
2018-07-12 21:41
Luqas84th: Same here. Can't install beta in any way. (Pro 6+ A)
2018-07-12 20:42
Reply Support () Report
Serkot
Donut

  • 0

    Threads

  • 3

    Posts

  • 30

    Credits

Gold:3

Sign In:0

2018-07-12 20:39

Show all posts
Edited by Serkot at 2018-07-12 20:49

pro6 plus
что было замечено при переходе на новую прошивку
1 сразу после установки неправильно работало разблокировка жестами ( вылечилось полным сбросом к заводским)
2 при установке гугл сервисов нужно в ручную им давать разрешения ,иначе нет синхронизации, уведомлений , итд
3 вылетают безсистемно некоторые приложения
4 В камере нет возможности выбора разрешения фото , только 4х3 или 16х9
режим  HDR стал снимать медленее , разница качества снимков малозаметна
При записи видео стала малозаметна пауза после нажатия кнопки стоп ,(ТУТ ОЧЕНЬ ОГОРЧИЛА МЕЙЗУ С ЗАПИСЬЮ ВИДЕО В МОНО !!!!!!!  ) имея супер звуковые усилители и поставить моно микрофон .....
5 Подключение к компьютеру в гнездо usb 3.0  стало нормально работать но при отключении кабеля остаётся висеть в шторке значёк подключения
6 Пропала постоянно выскакивающия надпись про калибровку датчика приблежения
7 система в общем стала работать быстрее

Уважаемые разработчики пожалуйста сертифицируйте в гугл этот смартфон и дайте людям полноценно пользоваться НФЦ , или хотя бы в международней прошивку разрешите пользоваться модулем
==============================================================
googl
what was noticed when upgrading to a new firmware
1 immediately after the installation, the unlocking of gestures (it was cured by a full reset to the factory ones)
2 when installing google services you need to give them permission manually, otherwise there is no synchronization, notifications, etc.
3 flies systematically some applications
4 In the camera there is no possibility to choose the photo resolution, only 4x3 or 16x9
The HDR mode began to take off more slowly, the difference in the quality of the pictures is hardly noticeable
When recording a video, a pause was noticeable after pressing the stop button, (HERE VERY HARMED THE MEYZE WITH RECORDING VIDEO IN MONO !!!!!!!) having super sound amplifiers and putting a mono microphone .....
5 Connecting to a computer in the usb 3.0 slot is working fine
6 There was a permanent pop-up inscr iption about the calibration of the proximity sensor
7 the system in general began to work faster

Dear developers, please certify in Google this smartphone and let people use the NFC in full, or at least in the international firmware you can use the module
Reply Support () Report
Luqas84th
Eclair

Gold:36

Sign In:0

2018-07-12 20:42

Show all posts
giannaki500 replied at 2018-07-12 20:25
i have problem cant update beta flyme 7

Same here. Can't install beta in any way. (Pro 6+ A)

Comment

Gui1ty: Global ROM can only install on global version of phone
2018-07-12 21:49
giannaki50 ...: my globla rom have
2018-07-12 20:55
Reply Support () Report
giannaki500
Froyo

Gold:5221

Sign In:548

2018-07-12 20:55

Show all posts
Edited by giannaki500 at 2018-07-12 21:04

my global rom have
Reply Support () Report
4ndrey
Cupcake

  • 0

    Threads

  • 2

    Posts

  • 17

    Credits

Gold:6

Sign In:1

2018-07-12 21:41

Show all posts
giannaki500 replied at 2018-07-12 20:25
i have problem cant update beta flyme 7

у мен такая же проблема телефон про 6 плюс 6.3.0.0G что делать кто знает?? help
Reply Support () Report
Gui1ty
Donut

Gold:27

Sign In:0

2018-07-12 21:43

Show all posts
Edited by Gui1ty at 2018-07-12 21:47

Hi!
Beta is work smooth, but have some problem:
1. After install (with clear data) did't resolve name of operator in first sim-slot, showed only MNC code. In second slot resolved correctly.
2. Very bad vibration (on all functions). Sounds rattle, like it is broken. On stable FW work normal.
3. Errors in russian translation:
In permission request "Location" translated incorrect "Поиск", correct translate is "Местоположение"
In gallery, wallpaper set dialog, after select image, on screen select place of set wallpaper: "Lock Screen" translated "Экран", but correct "Экран блокировки".

Battery life is normal, like on 6.3.0.0G. Interface and typical scenario work fast. Good option of change scaling, but be good add icon grid 5x6.
WiFi and cell network work good. No problem with install google service.
Fingerprint and face-unlock work perfectly.
Connection with Samsung Gear Sport without problem.

That is needed:
- Google certification
- Allow NFC for work with Google Pay (also google certification)
- Vibration style and power selector (for notification and call)
- separate SMS to personal and notifications SMS like in 5.2.7.0G

Best Regards, Michail
Reply Support () Report
Gui1ty
Donut

Gold:27

Sign In:0

2018-07-12 21:49

Show all posts
Global ROM can only install on global version of phone

Comment

Luqas84th: I know that. I have 6.3.0.0 G on Pro6Plus A (used this method from XDA). But i still can`t instal beta (any way).
2018-07-12 22:49
Reply Support () Report
Gui1ty
Donut

Gold:27

Sign In:0

2018-07-12 22:02

Show all posts
Is version of phone international?
Did You try redownload ROM?
When I installed beta, it requested check "clear data". Maybe You also need to check "clear data"?
Dont forget backup Your data before clear.

Clear data is necessarily for update to beta (Android version is change 6 -> 7) it is wrote in first post.
Reply Support () Report
You have to login before you can reply Login | Register

©2022 Meizu Telecom Equipment Co., Ltd. All rights reserved.