|
Plz show me your settings
| |
|
|
|
|
Steps to follow:-
1. Add VPN as ims 2. Go in dialer and type *#*#3646633#*#*. 3. Left swipe and go in CDS info within it multiple VPN. Select ims and start it. 4. Right swipe twice and go in IMS and make ussd on. 5. Select operator as RJIL. 6. Set off mncmcc check 7. enable hd voice, if hd symbol not seen disable and enable jio sim it should appear If not restart and enable hd voice..... It must work, i had uninstalled jio join now as volte working awesome. | |
|
|
|
|
HD symbol showing snaps attached
| |
|
|
|
|
Finally done....
| |
|
|
|
|
Thanksss...
| |
|
|
|
|
I was making one silly mistake...and i have come over it..
| |
|
|
|
|
I tried all the methods but it's not working, please help me
| |
|
|
|
|
Follow steps in sequence given u will be able enable volte
| |
|
|
|
|
Refer this thread for a detailed procedure-http://forum.flymeos.com/thread-7052-1-1.html
| |
|
|
|
|
Edited by tbkarthic at 2016-11-04 22:21
kum_gpm replied at 2016-11-04 16:37 TRY FOLLOWING STEP. STEP 1: go to apn setting add apn apn name :ims apn :ims authentication :none apn type:ims STEP 2: open call app then touch following *#*#3646633#*#* now your entered in engineer mode then come down to IMS in telephony menu (your already in this menu) STEP3: 1> Select common menu 2>operator_code 3>select volte operatior RJIL (come down to touch set) 4>come back go in to mncmcc check select <OFF> ( touch set) 5>come back 2 times then go in to USSD 6>go in to USSD Support then touch <ON> (touch set) *if you followed step by step correctly HD icon displaying in notification bar at near by battery icon dont forget to turn on hd voice in network setting. BUG:.... every time when you restart mobile you need to set all setting every time. FOR FLYME TEAM: how to set default above setting | |
|
|
|
