Bootloop issueHi guys. I'm from Turkey and there is no Meizu Service Center so here i am with my problem.
I flashed latest android 7.0 Flyme 6.7.8.22 beta version and i wasn't very satisfied and i wanted to back to 5.1.3.4 G version. So i downloaded the rom file to my main phone storage and then clicked update. Everything went well. Untill phone doesn't boot at all. It bootloops. Just black screen with white Meizu logo and then vibrates and reboots again. So what can i do about this situation? Tried every sp flash method but SP flash can not catch the phone. It immediately reboots. Please help me. Thank you. | |
|
|
|
|
Edited by drbahaeddin at 2017-09-05 21:27
I tried your second method couldn't succeed. 3 option won't work for me because i can not get into recovery. I'll try first method and let you know. I tried your first method too and here is the result : And the same result on the 2nd method.
| |
|
|
|
drbahaeddin replied at 2017-09-05 21:16 Thanks for informing me In my case 2 method work i didn't try 3rd one But don't worry I will tell you 4th and last method suggested by chinese forums of meizu developer And i am 100 sure that will work Wait for 1 or 2 days Or you can go to service center I will post 4th method in 2 days after flashling to my note 3 | |
|
|
|
|
Hey buddy switch off the phone press power + volume up key go to recovery mode tick update system and wipe data and start.
| |
|
|
|
|
Dude phone can not enter recovery. Only fastboot. And bootloop.
| |
|
|
|
|
http://adf.ly/1o5bzA
You watch this i fixed the problem Now sp flash tool Working In meizu M3 Note while flashing I flashed my phone too by this process and showed you in this video Just watch Try and then Believe | |
|
|
|
shahid19950311 replied at 2017-09-06 18:07 I'm trying right now. Thanks for your efforts mate. | |
|
|
|
|
This has happened with many users. Right now, there are only 2 options out of which one is going to a service centre which is not at all useful for you, the other is finding someone with an MRT Dongle who can flash the service firmware on your phone. None of the other methods will work including the SP Flash tool method too because you do not have a MRT Dongle.
| |
|
|
|
|
I tried your new method and it failed just like others. I have no problem with VCOM drivers. all set properly. but sp flash gives me this error like before shown.
| |
|
|
|
|
Now my phone is dead for me? Is that it? How could you build a beta like this? There should be a warning about never going back to Android 5.1. This is on you.
| |
|
|
|
26