Need help with Fast Boot ModeAbout the phone: Meizu m3 Note 16 GB, I don’t’ know if it’s L or M, it was brought in China this spring. I was using the latest G version firmware, everything was working great. Problem A couple of days ago my phone’s battery died after I charged it and turned the phone ON the Meizu logo appears and a dark screen after that, nothing else. Flyme is not loading. I have tried all the key combinations. Only after pressing the Power + Volume Down the phone starts in the FastBoot mode. In this case, my PC can recognise the device as a Meizu M3N, but I have no access to data or SDcard. I almost can do nothing with it. I had installed ADB (Android Debug Bridge) and this soft can see the phone but i don’t know what else I can do. I suppose that if the Phone is recognised by PC and it can run this boot mode, probably there is a way to restart (recover, reboot) it somehow. I would be very grateful for any help. P.s I’m quite a noob in such kind of things so may I ask you for detailed answers. Thx ! | |
|
|
|
|
Bootloader is locked by Meizu.
Fastboot will not work. There is no method of unlocking yet. | |
|
|
|
ChatDexter replied at 2016-12-06 13:59 I can't access that menu. After the MEIZU logo, nothing else appears on the screen. As I told you, the device is listed in the FASTBOOT DEVICES LIST can that help by any chance? Yesterday I could push some files on the phone using that FASTBOOT commands. | |
|
|
|
User466005548 replied at 2016-12-06 07:00 See what iIwas trying to say? You can not use adb commands because Meizu doesn't have its bootloader unlocked... Try this, disconnect any USB cable from your phone, make sure it is turned off, then press and hold at the same time POWER + VOLUME UP, when Meizu logo appears release only the POWER BUTTON and keep pressing the volume up button. The recovery menu should appear. Tell me if you can access that menu and we can proceed for the next step. Good luck man! | |
|
|
|
User466005548 replied at 2016-12-06 06:55 I'm not sure I've got the right soft for all that staff. I've got some kind ADB and FASTBoot programs. So, when I type in cmd "adb devices" the list is empty, but when I type "fastboot devices" the phone appears in the list. Today I even pushed some files on it. I would be very grateful if you could guide me through. | |
|
|
|
ChatDexter replied at 2016-12-06 00:00 Oh, mate thank you so much indeed ! Yes, the phone is in the device list | |
|
|
|
|
Edited by ChatDexter at 2016-12-06 00:04
This happened to me. I soft bricked it because of flashing a corrupted bootanimation.zip lol... But I FIXED IT. You can not use ADB commands because MEIZU doesn't have the bootloader unlocked... Anyways try this command (IN THIS ORDER) adb devices adb continue When you write down "adb devices" in the terminal, does your phone appears in the device list? If yes, then it is easy to fix, i can guide you but tell me first if it appears in the adb devices command... Good luck! | |
|
|
|
xncxyz replied at 2016-12-05 15:15 it doesn't work that easy. Do u have experience with that ? | |
|
|
|
|
If `adb devices` shows your phone,
type `adb reboot recovery` to boot into recovery and follow the above said steps. | |
|
|
|
Mike_25 replied at 2016-12-04 21:08 It is not going to recovery. At least nothing appears on pc. | |
|
|
|
|
Try this: Push Power + Vol Up button to go in recovery; then connect the phone to the computer with USB cable. On your computer should appear an empty device called "Recovery". Put there the "update.zip" file of the firmware you want then disconnect the phone and press "Start". I hope this helped you.
| |
|
|
|
10