[Flyme]M5s M612H unable to flash

4342

4

2018-06-08 22:44

Show all posts
Hi,
   I have just bought a brand new Meizu M5s global version (M612H).


The phone firmware updater app is  6.8.6-2018041820
The phone firmware version is 6.2.0.3G (from 5/04/2017 ?? not sure)

I have downloaded for the M5s this version from here
http://www.flymeos.com/firmwarelist?modelId=68&type=1
Flyme 6.3.0.0G
892M
2018-4-27
         

If I check for OTA updates, there is none.


If I pass through the computer to the phone this "update.zip" file, and I execute it with the phone, it seems to works, reboots, and then nothing change, nor upgrade.


If I power off, the hold power and vol+, I access to Firmware updater, I press Start, then it says "the firmware is too old". Reboots and nothing change.

Also I have tried sp_flash_tool method.
I have downloaded many versions of sp_flash_tool.
But I haven't got the scatter file (at least, the oficcial one in the 6.3.0.0G didn't work)
The last version of sp_flash_tool I tried is SP_Flash_Tool_v5.1820_Win
If I use one scatter file that I found over the internet (called MT6753_Android_scatter) I don't see system partition to be re-written and doesn't help me to feel secure about the process.

I know the method:
- to turn off phone.
- Then plug to computer
- For 0 to 2 seconds I have MT67xx_preloader (after that, it changes to MTP)
- That's the time to flash
(but I didn't press start because it is not the original scatter file and that could brick my phone)

But, as much as I tried, nothing seems to work. So I'm stuck with 6.2.0.3G with 4 cores always working at max_frec...


Can you give me some hints in this regards?
Any help will be appreciated

PD: now I have tried throught the flyme menu of security to give "super user privileges". Now Im not able nor to flash, nor even to check OTA updates...

PLEEEAAASSSEEE help!