M3 note Chinese to global IDProceeding from the above, if you do not want to get a brick during the transition to the global version, use the IRON rule - NEVER install the firmware BELOW that which came from your factory. This applies to both the migration to the global, and simply the firmware of ANY versions of the smartphone.
!!!ATTENTION!!! Do not use to change ID Termux terminal , it is recommended to use Terminal Emulator for Android by Jack Palevich Preparation: - get Flyme ROOT - install Super SU and update the binary- install the terminal and provide it Route rights . Installation: - download the scr ipt, unpack it and put it in the root of the internal memory (ie / sdcard / or / storage / emulated / 0 / ) Using the new version: - run the terminal - get root rights ( su ) - go to the root of the internal memory ( cd / sdcard ) - run the scr ipt ( sh newid.sh ) - Item 1 - check ID device - Item 2 - change device ID to global / international ( 68151001 ) - Item 3 - Change the device ID to Chinese (select between 68101006, 68101005, 68101001, 68101002 and 68101003 ) - Item 4 - reboot into Recover mode - Item 5 - device reboot
- Item 6 - exit the scr ipt | |
|
|
firmware not found
| |
|
|
help please
| |
|
|
2