How to choose SD Cards and which Speed Class

2688

8

2017-01-07 05:38

Descending
Author


    How to choose SD Cards and which Speed Class



    Here is a explanation of how to choose a microSD and SD Cards and with which Speed Class to choose for our needs and for an affordable price which us  fit.



    Greater Performance Choices

    There are wide discrepancies in memory card transmission speeds depending on the SD memory card manufacturer and brand. Varying speeds make it difficult to determine which card will provide reliable recording of streaming content. Recording video require a constant minimum write speed to ensure a smooth playback. The SD Association defines Speed Class standards indicated by speed symbols to help consumers decide what card will provide the required minimum performance for reliability. There are two kinds of speed indications regarding SD bus generation:

 

    Speed Class and UHS Speed Class* symbols indicate minimum writing performance to ensure smooth writing of streaming content such as video shooting. This is important mainly for camcorders, video recorders and other devices with video recording capabilities.


    Speed Class designates minimum writing performance to record video. The Speed Classes defined by the SD Association are Class 2, 4, 6 and 10.


    UHS Speed Class is designed for UHS** devices only and designates minimum writing performance to record video on UHS products. The UHS Speed Classes defined by the SD Association are UHS Speed Class 1 (U1) and UHS Speed Class 3 (U3).



* (Speed Class and the UHS Speed Class are not compatible.)
**UHS (Ultra High Speed), the fastest performance category available today, defines bus-interface speeds up to 312 Megabytes per second for greater device performance. It is available on SDXC and SDHC memory cards and devices.

 

    SD Speed Compatibility

    It’s important to remember that Speed Class and UHS Speed Class are two different speed indication symbols for different devices. However, a UHS-I memory card may also indicate a Speed Class.


 
    The host device Speed Class requirements are minimum requirements for optimum performance. If your host device requires a Speed Class 4 SD memory card, you can use Speed Class 4, 6 or 10 SD memory cards. If your host device requires a Speed Class 6 SD memory card, you can use Speed Class 6 or 10 SD memory cards.


    Fragmentation and Speed

    The memory of a card is divided into minimum memory units. The device writes data onto memory units where no data is already stored. As available memory becomes divided into smaller units through normal use, this leads to an increase in non-linear, or fragmented storage. The amount of fragmentation can reduce write speeds, so faster SD memory card speed standards help compensate for fragmentation.
The SD Association developed standards specifying various operating conditions for SDHC, SDXC, SDHC UHS and SDXC UHS memory cards to achieve the minimum speed according to the card's speed class. Speed symbols are provided to help identify cards that comply with these standards.


Hope this is usefull. If you wantshare your opinion in comments.