"Don't cover top of the phone while unlocking" What ia this? Harmful?

2298

2

2018-07-13 21:45

Descending
Show all posts
Author
Edited by Prashant073 at 2018-07-13 19:18

S80713-174319.jpg   S80713-174336(1).jpg  

Introduction.png  

Hey guys, You might have noticed this type of message while unlocking your device.
What is this !!? And is it harmful for your device ?

Details.png  

Let's understand this Questions' answers, but before this you have to know,
What is Proximity Sensor ?
~ Proximity Sensor is a sensor which sense the distance between obstacles and source of sensor, Commonly IR [ Infrared Radiations (Which are invisible to human Eyes)] Proximity Sensor is used in Mobile devices.
If you noticed, there are two black dots are available on top left/right side of device, In that there is one emitter and one receiver,
This radiation helps to turn off/on the screen of device and avoiding wrong touch to screen.
When objects are far away from sensors, one emits IR radiation and one receives the same but if distance are too close then There will be no objects to receive radiations, So while turning on the device with hiding this two, as its command is to turn off the screen, then how it will react Or what should it do ?

Hence the message "Don't cover top of the phone while unlocking" appears


If you have seen in settings>>Accessibility>>roximity sensor calibration, there will be dial box will appear like as below,
S80713-173515(1).jpg  

Here as per message If lightning is too high then receiver not able to detect the object near to it and if too law then all black, so no detection for Radiations,As it detect only distance between two surface it is not harmful for device.
If you try to calibrate the same with hiding there will be messege like below :
S80713-182219(1).jpg  
And without hiding,
S80713-182238(1).jpg  

Hence that's all about Proximity Sensor

That's all for now,
Keep Supporting me by commenting and liking my threads ,

Hope you like it.